Frequently Asked Questions

  • What does site preparation include before construction starts?

    Site preparation covers clearing, excavation, grading, and gravel pad work in sequence before any structure goes up. At Swanson's Earth & Stone, the same crew handles each of those phases so the lot is properly shaped, drained, and ready for the next trade.
  • How does grading work on hilly Northeast Tennessee lots?

    Grading on sloped lots shapes the terrain so water moves away from structures and drains correctly. Swanson's Earth & Stone handles both rough grading to establish the slope and drainage pattern and finish grading to bring the surface to its final elevation before landscaping begins.
  • What's included when Swanson's handles utility trenching?

    A utility dig includes cutting the trench to the required depth, placing pipe or conduit, and backfilling in compacted lifts so the surface doesn't settle over time. Surface restoration — seeding, sodding, or patching hardscapes — is part of the job after backfill is complete.
  • Why hire one crew for both excavation and hardscapes?

    When the same crew prepares the base and sets the surface, nothing gets lost between the digging and finishing phases. Swanson's Earth & Stone handles excavation and grading in-house before hardscape installation, so the base is compacted to exactly the depth and grade the paver or stone requires.
  • What's the difference between rough and finish grading?

    Rough grading establishes the basic slope and drainage pattern across the lot, while finish grading brings the surface to its final elevation and smooths it for seeding, sod, or landscaping. Skipping or rushing finish grading can cause drainage problems that are expensive to correct after planting is done.
  • What's the most common hardscape installation mistake?

    Installing pavers or stone on a base that's too shallow or not fully compacted is the most common cause of hardscape failure. If the base settles, the surface sinks or heaves within a season or two, and the only real fix is to remove everything and rebuild the base from scratch.
  • When does grading happen during a new construction build?

    Finish grading typically happens after the house is framed and major utility work is complete, but before landscaping begins. Getting the timing right matters — heavy equipment traffic after finish grading can undo the work and require a second pass to restore the surface.
  • What utility locates are required before trenching starts?

    Public utilities — electric, gas, and phone — are marked by calling the local utility locate service before any digging begins. Private utilities like well lines, septic laterals, and irrigation are the property owner's responsibility to locate, either personally or through a private locating service.
  • How does dump truck hauling work on steep rural roads?

    Swanson's Earth & Stone operates owner-driven trucks sized for rural properties in Unicoi, Hampton, and similar areas with narrow, steep, or gravel access roads. Material is delivered and placed accurately so it doesn't need to be repositioned, and the driver adjusts placement on the fly if site conditions change.
  • What does a property look like after demolition is finished?

    After demolition, the site is cleared of the structure and debris so the next phase of construction or landscaping can begin without hidden obstacles in the ground. The crew also addresses remaining foundations, concrete, and root systems that would otherwise interfere with excavation or utility work later.